Benefits of Using Heavy Duty Flexible Steel Edging

These Heavy duty flexible steel edgings will not rust or flake, they will not shatter if caught with a strimmer or mower. Furthermore, they have no sharp edges and a dual lock mechanism to secure each section. Simply tap into the ground to form the perfect edge restraint that will quite frankly last for decades.

The face and the ground spike are formed from a single piece of steel. The spike has a unique fold along its center to provide maximum strength. Reinforcing the spike, making it ideal for use in tougher ground conditions.

In addition, if soft ground is encountered, you have the option to purchase 300mm Galvanised Pins with Clip Accessory.  This simply clips through the ground spike to provide additional stability.

Not only easy to bend by hand to create perfect corners also flexible enough to create perfect curves.They simply tap into the ground to form the perfect curved, straight or angled edge restraint. That will quite frankly last for decades.

The entire range is quick and easy to install, with no specialist tools required. Available in a range of face/width combinations and finishes.

Weathered Steel

Our ASTM A588 weathering steel has a unique look. The naturally oxidizing finish makes it especially desirable for many architectural projects. Weathering steels are a group of steel alloys developed to remove the need for painting. Over time they form a stable rust-like appearance if exposed to the elements.

Made popular by the U.S Steel Co. and best-known under the US trademark COR-TEN®. They resist the corrosive effects of all types of weather. By forming a coating of dark brown oxidation over the metal. In simple terms, the steel is allowed to rust and that rust forms a protective coating that slows the rate of future corrosion.

Secure Connecting Mechanism

The  dual locking mechanism provides a rigid connection between adjoining edges on our Heavy duty flexible steel edging. Helping to provide an almost seamless connection.

Using a pair of thin nosed pliers pull both of the thin tabs through the slit in the adjacent edging and rotate them back on themselves.

Once connected, if more hands are available, pre-joined edges can be installed as one continuous length. Making it far easier to create larger curves or complex shapes.

Optional Spike Extension

This ingenious spike extension can be retrofitted to the edging after the edging is installed. If softer ground is encountered, simply look back at your installed edging, if you notice any that appear to be unstable or leaning over slightly, just scrape back some soil from around the top of the spike to reveal the hole in the spike that houses the extension clip, insert the clip through one of these preformed holes ,place your foot against the edging to hold it upright, locate a pin into the clip and drive the pin into the ground using a mallet, the clip expands as the pin passes through creating a secure connection with the edging providing the additional support required.